Integrated Sewage Treatment Equipment
Wastewater Treatment Equipment
Sewage Treatment Equipment
Water Treatment Equipment
The water quality after the treatment of the mobile integrated sewage treatment system reaches the first level B standard: CODcr≤60mg/L, BOD5≤20mg/L, SS≤20mg/L, NH3-N≤8mg/L, TP≤1mg/L, E. coli ≤104mg/L.
Mobile integrated equipment processing effect:
| index | COD(mg/l) | BOD(mg/l) | SS(mg/l) | NH3-H(mg/l) | TP (mg/l) | E. coli (mg/l) |
| Design outlet water | <250 | <100 | <200 | <30 | <50 | |
| Mobile integrated water outlet | ≤60 | ≤20 | ≤20 | ≤8 | ≤1 | ≤104 |
Features:
(1)The flux is greater.
(2)The treatment effect is good.
(3)Novel design, impact load resistance and long service life.
(4)Continuous operation is possible.
(5)High backwashing efficiency and low water consumption.
(6)Run fully automated control.
(7)Small head loss.
(8)Low operating cost.
(9)The installed power is low, the equipment is simple and compact, the auxiliary equipment is few, and the idle rate is low.
(10)Small footprint and high filtration efficiency.
(11)Fast recovery of system functions.
(12)Short design and construction period. The overall modularization allows design and construction to be carried out at the same time.
(13)The equipment has strong ductility and capacity expansion, and can adapt to the treatment scale of thousands to millions of cubic meters of water.
(14)The water temperature generally needs to be used above 5°C.
